Genicom PC4 manual Installation of Memory Cartridge

Chapter 2 — Installation

Memory Cartridge

The EasyCoder PC4 is fitted with 1 MB built-in flash memory and 2 MB DRAM. The built-in memory can be expanded using an exchange- able memory cartridge with 1MB of Flash memory.

When fitting or removing a memory cartridge, the power to the printer must be off!

Installation of Memory Cartridge

1Ensure that the On/Off switch on the printer is off (0).

2Open the top cover by pressing the two locks on either side.

3Remove the cartridge slot cover located to the left of the media roll. Be careful not to drop it inside the printer.

4Ensure that the switch at the front short side of the cartridge is in its lower position.

5Insert the memory cartridge into the cartridge slot. Its slightly curved shape ensures that the cartridge can only be fitted correctly. Push firmly to seat the cartridge.

6Firmly close the top cover and switch on the power.

Memo

Carr

y

tr idge

Insert memory cartridge

Switch down

8 EasyCoder PC4 User’s Guide