Connections

Do not connect the power cord until all other connections have been made.

7Connecting speakers for TH-P3

SP-THP3F

SP-THP3S

Front speakers

Surround speakers

Speaker cord

• Connect the black cords to the black (–) terminals.

• Connect the white cords to the red (+) terminals.

Before connecting the speaker cords;

Twist and pull the insulation coat off and remove.

SP-WP5

Subwoofer

SP-THP3C

Center speaker

CAUTION

If you connect speakers other than the supplied ones, use speakers of the same speaker impedance (SPEAKER IMPEDANCE) indicated on the rear of the center unit.

DO NOT connect more than one speaker to one speaker terminal.

When installing the satellite speakers on the wall;

Be sure to have them installed on the wall by qualified personnel.

DO NOT install the satellite speakers on the wall by yourself to avoid unexpected damage from falling off the wall due to incorrect installation or weakness in wall structure.

Care must be taken in selecting a location for speaker installation on a wall. Injury to personnel or damage to equipment may result if the speakers installed interfere with daily activities.

Precautions for daily use

When moving the speakers, do not pull the speaker cords; otherwise, the speakers may fall over, causing damage or injury.

Do not reproduce sounds at so high a volume that the sound is distorted; otherwise, the speakers may be damaged by internal heat buildup.

10