Advanced operations
See page 21 for button locations.
7For MP3/WMA: During playback or while stopped
7For
• For MP3/WMA, playback starts from the selected track.
• For JPEG, proceed to perform the following operation.
2 Press play button for corresponding source (DVD 3 or USB MEMORY 3) or ENTER.• Track
• When you press ENTER for JPEG, only the selected file is played back.
To skip the file during playback
Press x/4 or Cursor 5/Y.
NOTE
•You can also check playback information on the display window. (See page 18.)
•Some group, track and file names may not be displayed correctly depending on recording conditions.
•The order of groups, tracks, and files may be displayed differently from the order displayed on your personal computer.
Selecting a view angle
7During playback of a disc containing
1Press ANGLE with SHIFT pressed.When using the ANGLE button:
Example: The first view angle is selected out of 3 view angles recorded.
.
2Press ANGLE repeatedly with SHIFT pressed, or Cursor Y/5 to select the desired view angle.
1Press ON SCREEN twice.When using the
2
3
Resume Playback
When Resume Playback is set to “ON” (see page 35) and you stop playback by the following operations, the position where playback has been stopped is stored. (RESUME indicator lights on the display window.)
•Turning off the power (see page 14)
•Pressing 7 once
•Changing the source (see page 15)
To start playback from the stored position
•Press play button for corresponding source (DVD 3 or USB MEMORY 3) on the remote control or 3 (play button) on the center unit.
•Select DVD or USB MEMORY as the source again if you changed the source.
To clear the stored position
Press 7 again.
•Opening the disc tray or disconnecting the USB mass storage class device also clears the stored position.
NOTE
•(For DivX) The beginning of a scene where playback has been stopped may be stored.
4
5
6
27