Basic operations

See page 14 for button locations.

Sleep Timer [SLEEP]

The system turns off automatically when the specified period of time has passed.

Press SLEEP with SHIFT pressed.

Each time you repeat the procedure, the shut-off time changes.

Example:

minutes

To check the remaining time

Press SLEEP once with SHIFT pressed.

To change the remaining time

Press SLEEP repeatedly with SHIFT pressed.

To cancel

Press SLEEP repeatedly with SHIFT pressed, until “SLEEP – –” appears.

• Turning off the power also cancels the Sleep Timer.

Adjusting the output level of the front/center/surround speakers and subwoofer

1Press SPK-LEVEL to show the target speaker indication on thedisplay window.

Each time you press the button, the indication of the speakers changes as follows:

FRNT L (Front left speaker) Z FRNT R (Front right speaker) Z CENTER (Center speaker) Z SURR L (Surround left speaker) Z SURR R (Surround right speaker) Z SUBWFR (Subwoofer) Z (back to the beginning)

2Press LEVEL +/– to adjust the output level from –6 to 6.

NOTE

•You can also make adjustments by using the setup menu shown on the TV screen. (See page 34.)

•The adjustments take effect for all sources.

Changing the scan mode

The system can be accommodated to your TV’s scan mode.

NOTE

•To use the system in the progressive mode, it is required that the center unit is connected to the TV by using a component video cord (not supplied). (See page 11.)

7While DVD or USB MEMORY is selected as the source and before playback

1Press and hold SCAN MODE for 2seconds.

The current setting appears on the display window.

2 Press Cursor 3/2 to select the desired mode.

• NTSC: Select when your TV supports the NTSC interlaced video input only.

• NTSC PRG: Select when your TV equipped with component jacks supports the NTSC progressive video input.

• PAL: Select when your TV supports the PAL interlaced video input only.

• PAL PRG: Select when your TV equipped with component jacks supports the PAL progressive video input.

You can get better picture quality in NTSC PRG, PAL PRG mode than in NTSC, PAL mode.

3 Press ENTER while the selected mode is displayed.

When “NTSC PRG” or “PAL PRG” is selected, the PROGRESSIVE indicator lights on the display window.

NOTE

•Although the picture may be distorted when you press ENTER, this is not a malfunction of the system.

•There are some progressive TVs and High- Definition TVs that are not fully compatible with this system, resulting in an unnatural picture when playing back a DVD VIDEO in the progressive scan mode. In such a case, change the scan mode to “PAL” or “NTSC”.

•All JVC progressive TVs and High-Definition TVs are fully compatible with this system.

16