Assembly Instructions

Remove all contents from the carton and make sure all parts are present before attempting to assemble. Tighten all bolt connections by hand first, then when the grill is fully assembled, go back and tighten.

1.Attach the Lockable Casters to the left Side Panel by turning the threaded end of each caster into the holes as shown. Securely tighten using the open-end wrench provided.

2.Attach each Wheel to the right Side Panel by insert- ing a Shoulder Bolt through the Wheel, Wheel Spacer and mounting hole, as shown. Secure the Wheel Assembly to the leg of the Side Panel with a Self Locking Nut. Use one of the wrenches to hold the bolt while tightening the nut with the other.

3.Attach the Base Panel to the left Side Panel, as shown, using three of the Long Bolts (two may be in panel already). Thread a Long Bolt into the upper mounting hole on the inside of the front of the Side Panel, leaving about 1/4". Hook the Base Panel brackets over the head of each Bolt as shown in Detail A. Slide the Base Panel forward (Detail A), then down, as shown in Detail B. Partially tighten each Bolt, keeping in mind that they will be securely tightened at the completion of assembly.

Side Panel, Left

Caster

Side Panel, Right

Wheel

Nut

 

Shoulder

Wheel Spacer

Bolt

 

Detail A

Detail B

Side Frame, Left

Bracket

Base Panel

10