13.Each Side Shelf has a support leg at the front and a support brace at the back. Position the left Side Shelf above the left Side Panel. Lower the Side Shelf and insert the support leg into the opening on the top-front of the left Side Panel. Align the mounting holes in the support leg and brace with the mounting holes in the Side Panel and securely fastened with Long Bolts Lock Washers, and Flat Washers. Repeat this procedure with the Right Side Shelf w/Burner. Tighten all screws from Grill and Lid Assembly.

14.Attach one of the Cruet Shelves to the left Side Shelf. This is accomplished by aligning the notch in the end of the shelf over the support rod located at the left side of the control panel. Rotate the Cruet Shelf up, sliding its top edge behind the front edge of the Side Shelf. Secure with Long Bolts, Lock Washers and Flat Washers. Repeat this procedure to attach the other Cruet Shelf to the Side Shelf w/Burner.

Side Shelf

Side Shelf

w/Burner

w/Burner

Cover

 

Side Shelf

Support Leg

Support Leg

and Support

Brace

Mounting Holes

Cruet Shelf

15