How To Use George Foreman’s
Lean Mean Fat Reducing Griddle
1.Before using this appliance for the first time, clean the Griddle as out- lined in the User Maintenance Instructions.
2.Slide the grease catching Drip Tray beneath the front of the unit with the Handle facing out.
3. Attach the Service Tray to the |
|
| Service Tray |
Griddle. Insert the front supports |
|
|
|
|
|
| |
into the holes in the Griddle frame |
|
|
|
then rotate the back end of the |
|
|
|
Service Tray down until the rear |
|
|
|
Rear |
|
| |
supports snap into place. To |
| ||
Supports |
|
| |
remove the Service Tray, reverse |
| ||
|
|
| |
|
|
| |
this procedure. |
|
|
|
4.To preheat: Turn the Temperature Control Knob to the OFF position.
Insert the Temperature Control Probe fully into the Probe
Receptacle. Plug the cord into a 120V AC outlet. The variable temperature control allows you to cook at a specific heat setting; 250˚ F to 450˚ F. Align the selected temperature with the Power Light. When the Griddle is heating, the Power Light illuminates and it will remain ON until the set temperature has been reached. Then it will cycle on and off, as needed, to maintain the set temperature.
5.Allow the Griddle to preheat except where noted on the Cooking Chart. The preheat time will vary, depending on the heat setting you have selected. The higher the heat setting, the longer the preheat time.
6.Carefully place the items to be cooked on the Griddle.
7.Allow the food to cook, turning halfway through cooking time if needed.
Do not leave appliance unattended during use!8.When finished cooking, turn the Temperature Control Knob to the OFF position. Disconnect the plug from the wall outlet.
9.Remove the food using the Plastic Spatula provided. Be sure to always use either plastic or wooden utensils so as not to scratch the
10.Let the appliance cool completely. When cool, the Drip Tray may be removed and emptied. Be sure the liquid has cooled before removing
Drip Tray.7