Preparing for Use (Cont.)
4.Replace Basket Cover so it fits TIGHTLY against food. (The Cover will "hold" the food in place as it turns on the Rotisserie Bar.) The cover can be adjusted up or down to accommodate the thickness of the food.
5.Locate looped wires on opposite sides of Adjustable Basket. Place an End Bracket over each set of looped wires
(on both sides of Basket). The Brackets have
6. Carefully slide Rotisserie Bar (pointed |
| |
Figure 8 | ||
end first) through square hole in End | ||
Bracket, through Basket, and through |
| |
opposite End Bracket. See Figure 8. |
|
7.Center Basket on Rotisserie Bar and push each End Bracket against Adjustable Basket. Tighten both wing nuts to secure all pieces in place.
Using Baking Sheet
NOTE: Do not use the Baking Sheet at the same time as the Rotisserie Bar.
1.Use the Cover Handles to lift open the Cover.
2.The Baking Sheet can be used in
the middle position only. See Figure 9. Slide Baking Sheet into Rotisserie Oven at middle level as shown. When using the Wire Rack for baking, be sure the two cross wires are on the bottom.
MIDDLE
POSITION
Figure 9
18