| Specifications |
|
| Model HR3030 |
|
| Axial Pump |
|
Volume HR3030 | 3.0 GPM | |
Maximum Discharge Pressure | 3000 PSI | |
Maximum Inlet Pressure | Up to 90 PSIG1 | |
RPM | 3450 | |
Plunger Diameter | 16mm | |
Stroke | 5.9mm (8.0 o angle) | |
Crankcase Oil Capacity | 4.5 fl. oz. | |
Temperature of Pumped Fluids | Up to 80 oF | |
Inlet Port | 1 x 1/2" NPT | |
Discharge Ports | 3/8" NPT | |
Shaft Rotation | Clockwise | |
Weight | 11.4 lbs. | |
Width | ||
Height | ||
Swash Plate Bore | 1"x3/16" Keyway | |
Valve Type | Polyamide Plastic | |
1 | A 25 PSIG minimum inlet pressure is required. |
|
|
| |
HR3030 ELECTRIC HORSEPOWER
REQUIREMENTS
RPM | GPM | 1500 PSI | 2000 PSI | 2500 PSI | 3000 PSI |
3450 | 3.0 | 3.1 | 4.1 | 5.1 | 6.2 |
HR3030 GAS HORSEPOWER
REQUIREMENTS
RPM GPM 1500 PSI 2000 PSI 2500 PSI 3000 PSI
3450 | 3.0 | 4.1 | 5.5 | 6.8 | 8.2 |
HORSEPOWER RATINGS: The rating shown are the power
requirements for the pump. Gas engine power outputs must be approximately twice the pump power requirements shown above.
We recommend a 1.15 service factor be specified when selecting an electric motor as the power source. To compute specific pump horse- power requirements, use the Follow- ing formula:
Electric HP = (GPM X PSI) / 1460 Gas HP = (GPM X PSI) / 1100
5
