| Specifications |
|
| Model HR3025 |
|
| Axial Pump |
|
Volume HR3030 | 3.0 GPM | |
Maximum Discharge Pressure | 2500 PSI | |
Maximum Inlet Pressure | Up to 90 PSIG1 | |
RPM | 3450 | |
Plunger Diameter | 16mm | |
Stroke | 5.9mm (8.0 o angle) | |
Crankcase Oil Capacity | 4.5 fl. oz. | |
Temperature of Pumped Fluids | Up to 80 oF | |
Inlet Port | 1 x 1/2" NPT | |
Discharge Ports | 3/8" NPT | |
Shaft Rotation | Clockwise | |
Weight | 11.4 lbs. | |
Width | ||
Height | ||
Swash Plate Bore | 3/4” x 3/16” Keyway | |
Valve Type | Polyamide Plastic | |
1 | A 25 PSIG minimum inlet pressure is required. |
|
|
| |
HR3025 ELECTRIC HORSEPOWER
REQUIREMENTS
RPM | GPM | 1000 PSI | 1500 PSI | 2000 PSI | 2500 PSI |
3450 | 3.0 | 2.1 | 3.1 | 4.1 | 5.1 |
| HR3025 GAS HORSEPOWER |
| ||||
|
| |||||
|
| REQUIREMENTS |
| |||
RPM | GPM | 1000 PSI | 1500 PSI | 2000 PSI | 2500 PSI | |
3450 | 3.0 | 2.7 | 4.1 | 5.5 |
| 6.8 |
HORSEPOWER RATINGS:
The rating shown are the power requirements for the pump. Gas engine power outputs must be approximately twice the pump power requirements shown above.
We recommend a 1.15 service factor be specified when selecting an electric motor as the power source. To compute specific pump horse- power requirements, use the Follow- ing formula:
Electric HP = (GPM X PSI) / 1460 Gas HP = (GPM X PSI) / 1100
4
