Gigabyte AGP 4X/8X manual English, Move to the BIOS file you want to flash and press Enter

2. Move to the BIOS file you want to flash and press Enter.

In this example, we only download one BIOS file to the floppy disk so only one BIOS file, 8KNXPU.Fba, is listed.

Please confirm again you have the correct BIOS file for your motherboard.

English

			Dual BIOS Utility
Boot From			Main Bios
Main ROM Type/Size			SST 49LF003A			512K
Backup ROM Type/Size			SST 49LF003A			512K
	Wide Range Protection			Disable
			1 file(s) found Bios
	8KNXPU.Fba	Auto	Recovery	Enable	512K
		Halt On Error		Disable
	Total size: 1.39MCopy Main ROM Data toFreeBackupsize: 911.50K
	F5 : Refresh	Load Default Settings			DEL : Delete
		Save Settings to CMOS
			Q-Flash Utility
		Load Main BIOS from Floppy
		Load Backup BIOS from Floppy
		Save Main BIOS to Floppy
		Save Backup BIOS to Floppy
Enter : Run		KL:Move		ESC:Reset	F10:Power Off

BIOS file in the floppy disk.

After pressing Enter, you'll then see the progress of reading the BIOS file from the floppy disk.

Dual BIOS Utility

Boot From			Main Bios
Main ROM Type/Size			SST 49LF003A			512K
Backup ROM Type/Size			SST 49LF003A			512K
	Wide Range Protection			Disable
			Boot From	Main Bios
			Auto Recovery	Enable
	...Reading BIOSHaltfileOnfromErrorfloppyDisable
	>>>>>>>>>>>>CopyMain ROM Data to Backup
			Load Default Settings
	Don't Turn OffSavePowerSettingsOr Resetto CMOSSystem
			Q-Flash Utility
			Load Main BIOS from Floppy
			Load Backup BIOS from Floppy
			Save Main BIOS to Floppy
			Save Backup BIOS to Floppy
Enter : Run		KL:Move		ESC:Reset	F10:Power Off

Do not trun off power or reset your system at this stage!!

After BIOS file is read, you'll see a confirmation dialog box asking you "Are you sure to update BIOS?"

3. Press Y button on your keyboard after you are sure to update BIOS.

Then it will begin to update BIOS. The progress of updating BIOS will be displayed.

Please do not take out the floppy disk when it begins flashing BIOS.

- 59 - Technical Reference