Gigabyte AGP 4X/8X manual Troubleshooting, English

Troubleshooting

If you encounter any trouble during boot up, please follow the troubleshooting procedures .

START

Turn off the power and unplug the AC power cable, then remove all of the add-on cards and cables from motherboard.

Please make sure motherboard & chassis are not short ?		Yes	Please isolate
			the short pin.
No
	Failure has been excluded.
Please make sure all jumper settings (such as CPU system bus		No	Make sure the
			jumper setting
speed, frequency ratio, voltage and etc.) are set properly.			are correct.
Yes
	Failure has been excluded.
			Plug the CPU
		No	cooling fan power
Check if the CPU cooling fan attached to CPU properly. ls			in the CPU fan
			connector. Plug in
CPU cooling fan power connected to CPU_FAN			the AC power
properly?			connector.
Yes
	Failure has been excluded.
		No	Insert and push
Check if the memory install properly into the DIMM slot.			the memory
			module vertically
Yes			into the DIMM slot.
	Failure has been excluded.

Insert the VGA card. Then plug in ATX power cable and turn on the system.

A

English

- 85 - Appendix