Gigabyte AGP 4X/8X manual English, Using the Q-FlashTM utility, Flash Type/Size

Using the Q-FlashTMutility:

This section tells you how to update BIOS using the Q-Flash utility. As described in the "Before you begin" section above, you must prepare a floppy disk having the BIOS file for your motherboard and insert it to your computer. If you have already put the floppy disk into your system and have entered the Q-Flash utility, please follow the steps below to flash BIOS.

Steps:

1.Press arrow buttons on your keyboard to move the light bar to "Update BIOS from Floppy" item in the Q-Flash menu and press Enter button.

Later, you will see a box pop up showing the BIOS files you previously downloaded to the floppy disk.

If you want to save the current BIOS for backup purpose, you can begin Step 1 with "Save BIOS to Floppy" item.

2. Move to the BIOS file you want to flash and press Enter.

In this example, we only download one BIOS file to the floppy disk so only one BIOS file, 8GE800.F4, is listed.

Please confirm again you have the correct BIOS file for your motherboard.

English

Q-Flash Utility V1.30

Flash Type/Size						SST 49LF003A		256K
				Keep DMI Data			Enable
				Update BIOS from Floppy
				Save	1	file(s) found
		8GE800.F4						256K
	:	Run	KL:Move				ESC:Reset	F10:Power
Enter									Off
		Total size: 1.39M					Free size:1.14M
		F5 : Refresh						DEL : Delete

BIOS file in the floppy disk.

Q-Flash Utility V1.30

Flash Type/Size		..............................	SST 49LF003A		256K
		Keep DMI Data		Enable
	Reading		...BIOSUpdatefile BIOSfrom floppyfrom Floppy
	......................>>>>>>>>>>>>
			Save BIOS to Floppy
	Don't Turn Off Power Or Reset System
Enter : Run		KL:Move		ESC:Reset	F10:Power Off

Do not trun off power or reset your system at this stage!!

After BIOS file is read, you'll see a confirmation dialog box asking you "Are you sure to update BIOS?"

Please do not take out the floppy disk when it begins flashing BIOS.

- 63 - Technical Reference