Gigabyte AGP 4X/8X manual English, Part Two, Entering the Q-FlashTM utility, KLJI Select Item

English

Part Two:

Updating BIOS with Q-FlashTMUtility on Single-BIOS Motherboards.

This part guides users of single-BIOS motherboards how to update BIOS using the Q-Flash™utility.

Entering the Q-FlashTMutility:

Step1: To use the Q-Flash utility, you must press Del in the boot screen to enter BIOS menu.

CMOS Setup Utility-Copyright (C) 1984-2003 Award Software

`	Standard CMOS Features	Top Performance
`	Advanced BIOS Features	Load Fail-Safe Defaults
`	Integrated Peripherals	Load Optimized Defaults
`	Power Management Setup	Set Supervisor Password

`Enter Q-Flash Utility (Y/N)? Y

PnP/PCI ConfigurationsSet User Password

`	PC Health Status	Save & Exit Setup
`	Frequency/Voltage Control	Exit Without Saving
ESC: Quit		KLJI: Select Item
F8: Q-Flash		F10: Save & Exit Setup

Step 2: Press F8 button on your keyboard and then Y button to enter the Q-Flash utility.

Exploring the Q-FlashTMutility screen

The Q-FlashBIOS utility screen consists of the following key components.

Task menu for Q-FlashTMutility

		Q-Flash Utility V1.30			Q-FlashTMutility bar
Flash Type/Size	..............................	SST 49LF003A		256K
		Keep DMI Data	Enable
		Update BIOS from Floppy
		Save BIOS to Floppy
Enter : Run	KL:Move		ESC:Reset	F10:Power Off	Action bar

Task menu for Q-Flash utility:

Contains the names of three tasks. Blocking a task and pressing Enter key on your keyboard to enable execution of the task.

Action bar:

Contains the names of four actions needed to operate the Q-Flash utility. Pressing the buttons mentioned on your keyboards to perform these actions.

GA-8IPE775 Series Motherboard - 62 -