On-chip SATA
Disabled | Disable SATA controller. |
Auto | When there is no device to be plugged in IDE1 or IDE2, SATA controller |
| will remap to IDE controller. (Default value) |
Manual | Set SATA Mode manually. |
SATA Port0 Configure as
IDE Pri. Master | Remap SATA Port 0 to IDE Pri. Master. |
IDE Pri. Slave | Remap SATA Port 0 to IDE Pri. Slave. |
IDE Sec. Master | Remap SATA Port 0 to IDE Sec. Master. |
IDE Sec. Slave | Remap SATA Port 0 to IDE Sec. Slave. |
SATA Port0 | SATA controller set to SATA port0. As this mode, it support by WinXP or |
| later OS only. (Default value) |
SATA Port1 | SATA controller set to SATA port1. As this mode, it support by WinXP or |
| later OS only. |
SATA Port1 Configure as
The values depend on SATA Port0.
USB Controller
Enabled | Enable USB Controller. (Default value) |
Disabled | Disable USB Controller. |
USB 2.0 Controller
Disable this function if you are not using onboard USB 2.0 feature.
Enabled | Enable USB 2.0 Controller. (Default value) |
Disabled | Disable USB 2.0 Controller. |
USB Keyboard Support
Enabled | Enable USB Keyboard Support. |
Disabled | Disable USB Keyboard Support. (Default value) |
USB Mouse Support
Enabled | Enable USB Mouse Support. |
Disabled | Disable USB Mouse Support. (Default value) |
AC97 Audio
Enabled | Enable onboard AC'97 audio function. (Default Value) |
Disabled | Disable this function. |
Onboard H/W LAN (*)
Enabled | Enable Onboard H/W LAN function. (Default value) |
Disabled | Disable this function. |
Onboard LAN Boot ROM (*)
This function decide whether to invoke the boot ROM of the onboard LAN chip.
Disabled | Disable this function. (Default Value) |
Enabled | Enable this function. |
(*) Only for
English
- 37 - | BIOS Setup |
