English
3/4) CPU_FAN / SYS_FAN (Cooler Fan Power Connector)
The cooler fan power connector supplies a +12V power voltage via a
Most coolers are designed with
Please remem ber to connect the power to the cooler to prevent system overheating and failure. Caution!
Please remember to connect the power to the CPU fan to prevent CPU overheating and failure.
1 |
|
|
CPU_ FAN |
|
|
Pin No. | Definition | |
|
|
|
| 1 | GND |
|
|
|
| 2 | +12V |
|
|
|
| 3 | Sense |
1 | 4 | Speed Control |
SYS_ FAN |
| (Onlyfor CPU_FAN) |
5)IDE1/IDE2 (IDE Connector)
An IDE device connects to the computer via an IDE connector. One IDE connector can connect to one IDE cable, and the single IDE cable can then connect to two IDE devices (hard drive or optical drive). If you wish to connect two IDE devices, please set the jumper on one IDE device as Master and the other as Slave (for information on settings, please refer to the instructions located on the IDE device).
4 0 | 3 9 |
2 | 1 |
- 20 - |
