English

2-1

Standard CMOS Features

 

 

 

 

 

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

 

 

 

 

Standard CMOS Features

 

 

 

Date (mm:dd:yy)

Mon, May 10 2004

 

Item Help

 

Time (hh:mm:ss)

 

22:31:24

 

Menu Level`

` IDE Channel 0 Master

[None]

 

Change the day, month,

` IDE Channel 0 Slave

[None]

 

year

 

` IDE Channel 1 Master

[None]

 

 

 

` IDE Channel 1 Slave

[None]

 

<Week>

 

 

Drive A

 

[1.44M, 3.5"]

Sun. to Sat.

 

 

 

 

 

Drive B

 

[None]

 

<Month>

 

Floppy 3 Mode Suport

[Disabled]

 

Jan. to Dec.

 

Holt On

 

[All, But Keyboard]

<Day>

 

 

 

 

 

 

1 to 31 (or maximum

 

Base Memory

 

640K

 

allowed in the month)

 

Extended Memory

127M

 

 

 

 

Total Memory

 

128M

 

<Year>

 

 

 

 

 

 

1999 to 2098

KLJI: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

 

F5: Previous Values

F6: Fail-Save Default

F7: Optimized Defaults

 

 

 

 

 

 

 

 

 

Date

 

 

 

 

 

 

The date format is <week>, <month>, <day>, <year>.

 

 

 

 

Week

The week, from Sun to Sat, determined by the BIOS and is display only

 

Month

The month, Jan. Through Dec.

 

 

 

 

Day

The day, from 1 to 31 (or the maximum allowed in the month)

 

 

Year

The year, from 1999 through 2098

 

 

 

Time

The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour military-time clock. For example, 1 p.m. is 13:00:00.

IDE Channel 0 Master, Slave/IDE Channel 1 Master, Slave

IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection.

IDE Channel 0 Master(Slave)/IDE Channel 1 Master(Slave) IDE Device Setup. You can use one of

three methods:

 

Auto

Allows BIOS to automatically detect IDE devices during POST(default)

None

Select this if no IDE devices are used and the system will skip the automatic

 

detection step and allow for faster system start up.

Manual

User can manually input the correct settings

Access Mode

Use this to set the access mode for the hard drive. The four options are:

 

CHS/LBA/Large/Auto(default:Auto)

Hard drive information should be labeled on the outside drive casing. Enter the appropriate option based on this information.

Cylinder

Number of cylinders

 

Head

Number of heads

 

Precomp

Write precomp

 

Landing Zone

Landing zone

 

Sector

Number of sectors

 

If a hard disk has not been installed, select NONE and press <Enter>.

 

 

GA-8IP775 Series Motherboard

- 32 -

Page 32
Image 32
Gigabyte GA-8IP775 Series user manual Standard Cmos Features, Time, IDE Channel 0 Master, Slave/IDE Channel 1 Master, Slave