Gigabyte GA-945PLM-(D)S2 3/4 CPUFAN / SYSFAN Cooler Fan Power Connector, FDD Floppy Connector

English

3/4) CPU_FAN / SYS_FAN (Cooler Fan Power Connector)

The cooler fan power connector supplies a +12V power voltage via a 3-pin/4-pin(CPU_FAN) power connector and possesses a foolproof connection design.

Most coolers are designed with color-coded power connector wires. A red power connector wire indicates a positive connection and requires a +12V power voltage. The black connector wire is the ground wire (GND).

Remember to connect the CPU/system fan cable to the CPU_FAN/SYS_FAN connector to pre- vent CPU damage or system hanging caused by overheating.

			CPU_FAN :
			Pin No.	Definition
			1	GND
		1	2	+12V / Speed Control
			3	Sense
CPU_FAN
			4	Speed Control
			SYS_FAN :
	1		Pin No.	Definition
SYS_FAN			1	GND
			2	+12V
			3	Sense

5)FDD (Floppy Connector)

The FDD connector is used to connect the FDD cable while the other end of the cable connects to the FDD drive. The types of FDD drives supported are: 360 KB, 720 KB, 1.2 MB, 1.44 MB and 2.88 MB. Before attaching the FDD cable, please take note of the foolproof groove in the FDD connector.

3433

21

GA-945PLM-(D)S2 (rev. 2.1) Motherboard - 20 -