Gigabyte GA-945PLM-(D)S2 Standard CMOS Features, Date, Time, IDE Channel 0 Master/Slave, English

English

2-1	Standard CMOS Features
		CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
			Standard CMOS Features
	Date (mm:dd:yy)		Mon, Nov 20 2006		Item Help
	Time (hh:mm:ss)		10:31:24		Menu Level`
` IDE Channel 0 Master			[None]
` IDE Channel 0 Slave			[None]
` IDE Channel 2 Master			[None]
` IDE Channel 2 Slave			[None]
` IDE Channel 3 Master			[None]
` IDE Channel 3 Slave			[None]
	Drive A		[1.44M, 3.5"]
	Floppy 3 Mode Support		[Disabled]
	Halt On		[All, But Keyboard]
	Base Memory		640K
	Extended Memory		239M
KLJI: Move		Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
	F5: Previous Values		F6: Fail-Safe Defaults		F7: Optimized Defaults
	Date
	The date format is <week>, <month>, <day>, <year>.
	Week	The week, from Sun to Sat, determined by the BIOS and is display-only
	Month	The month, Jan. Through Dec.
	Day	The day, from 1 to 31 (or the maximum allowed in the month)
	Year	The year, from 1999 through 2098

Time

The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour military- time clock. For example, 1 p.m. is 13:00:00.

IDE Channel 0 Master/Slave

IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection.

IDE Channel 0 Master/Slave

IDE devices setup. You can use one of three methods:

• Auto	Allows BIOS to automatically detect IDE/SATA devices during POST. (Default
	value)
• None	Select this if no IDE/SATA devices are used and the system will skip the
	automatic detection step and allow for faster system start up.
• Manual	User can manually input the correct settings.
Access Mode	Use this to set the access mode for the hard drive. The four options are:
	CHS/LBA/Large/Auto(default:Auto)
Capacity	Capacity of currectly installed hard drive.

IDE Channel 2, 3 Master/Slave

IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection. Extended IDE Drive

You can use one of the two methods:
• Auto	Allows BIOS to automatically detect IDE/SATA devices during POST(default)
• None	Select this if no IDE/SATA devices are used and the system will skip the
	automatic detection step and allow for faster system start up.
GA-945PLM-(D)S2 (rev. 2.1) Motherboard		- 32 -