English
SMART LAN (LAN Cable Diagnostic Function)
CMOS Setup
SMART LAN
Start detecting at Port |
|
|
|
|
| Item Help | |||
= | Normal | / | Length | = | N/A |
| Menu Level` | ||
= | Normal | / | Length | = | N/A |
|
|
| |
= | Normal | / | Length | = | N/A |
|
|
| |
= | Normal | / | Length | = | N/A |
|
|
| |
KLJI: Move | Enter: Select |
| F10: Save | ESC: Exit | F1: General Help | ||||
F5: Previous Values |
| F6: |
| F7: Optimized Defaults | |||||
This motherboard incorporates cable diagnostic feature designed to detect the status of the attached LAN cable. This feature will detect cabling issue and report the approximate distance to the fault or short. Refer to the following information for diagnosing your LAN cable:
When LAN Cable Is Functioning Normally...
1.If no cable problem is detected on the LAN cable connected to a Gigabit hub, the Status fields of Pair
2.If no cable problem is detected on the LAN cable connected to a 10/100 Mbps hub, the Status fields of Pair
When a Cable Problem Occurs...
If a cable problem occurs on a specified pair of wires, the Status field will show Short or Open and the length shown will be the approximate distance to the fault or short.
For example, if it shows
When No LAN Cable Is Attached...
If no LAN cable is attached to the motherboard, the Status fields of all four pairs of wires will show Open and the Length fields show 0.0m.
- 38 - |
