English
On-Chip IDE Channel0
Enabled | Enable onboard 1st channel IDE port. (Default value) |
Disabled | Disable onboard 1st channel IDE port. |
On-Chip IDE Channel1
Enabled | Enable onboard 2nd channel IDE port. (Default value) |
Disabled | Disable onboard 2nd channel IDE port. |
IDE DMA transfer access
Enabled | Enable IDE DMA transfer access. (Default value) |
Disabled | Disable this function. |
On-Chip MAC Lan
Auto | |
Disabled | Disable onboard LAN chip function. |
On-Chip LAN BOOT ROM
This function decide whether to invoke the boot ROM of the onboard LAN chip.
Enabled | Enable this function. (Default value) |
Disabled | Disable this function. |
NV IDE/SATA RAID function (Note)
Enabled | Enable NV IDE/SATA RAID function. (Default value) |
Disabled | Disable this function. |
IDE Primary Master RAID
Enabled | Enable 1st master channel IDE RAID function. |
Disabled | Disable this function. (Default value) |
IDE Primary Slave RAID
Enabled | Enable 1st slave channel IDE RAID function. |
Disabled | Disable this function. (Default value) |
IDE Secndry Master RAID
Enabled | Enable 2nd master channel IDE RAID function. |
Disabled | Disable this function. (Default value) |
IDE Secndry Slave RAID
Enabled | Enable 2nd slave channel IDE RAID function. |
Disabled | Disable this function. (Default value) |
NV Serial-ATA 1
Enabled | Enable Serial ATA 1 supported. (Default value) |
Disabled | Disable Serial ATA 1 supported. |
NV SATA 1 class code(Note)
0101 | Set NV SATA 1 class code to 0101. (Default value) |
0104 | Set NV SATA 1 class code to 0104. |
(Note) When using driver version 1.2, please enable "NV IDE/SATA RAID function" if you wish to create RAID data drive or install O.S. on the RAID drive.
And manually set "NV SATA1/NV SATA 2 class code" from 0101 to 0104.
If your SATA hard drive is connected | to the SATA0 or SATA1 connector , please set "NV SATA1 |
class code" to 0104. If your SATA hard drive is connected to the SATA2 or SATA3 connector , | |
please set "NV SATA2 class code" to 0104. | |
- 36 - | |
