Temp Limit of Low Speed (Default temperature: 20oC)
The CPU fan will stop spinning when the CPU temperature is below the value set in Temp of FAN turn off option. The CPU fan will start to spin again with the parameter set in CPU FAN: Low Speed when the CPU temperature exceeds the value set in Temp Limit of Low Speed.
Temp Limit of Mid Speed (Default temperature: 50oC)
When the CPU temperature exceeds the value set in this option, the CPU fan spins with the parameter specified in CPU FAN: Mid Speed. For example, by default, when the CPU temperature exceeds 50oC, CPU fan runs with parameter 12.
Temp Limit of High Speed (Default temperature: 60oC)
When the CPU temperature exceeds the value set in this option, the CPU fan rotates with the parameter specified in CPU FAN: High Speed. For example, by default, when the CPU temperature exceeds 60oC, CPU fan runs with parameter 80.
Temp of full FAN Speed (Default temperature: 70oC)
When the CPU temperature exceeds the value set in this option, the CPU fan runs at full speed.
Top Performance |
|
| ||
|
| |||
| CMOS Setup | |||
` | Standard CMOS Features |
|
| Top Performance |
` | Advanced BIOS Features |
|
| Load Optimized Defaults |
` | Integrated Peripherals |
|
| Set Supervisor Password |
` | Power Management SetupTop Performance |
| Set User Password | |
` | PnP/PCI Configurations | Disabled.........................[] | Save & Exit Setup | |
` | PC Health Status | Enabled..........................[ ] | Exit Without Saving | |
Esc: Quit |
|
| KLJI: Select Item | |
F8: | KL: Move | ENTER: AcceptF10: Save & Exit Setup | ||
|
| ESC: AbortLoad | ||
|
|
|
|
|
If you wish to maximize the performance of your system, enable "Top Performance."
Disabled | Disable this function. (Default Value) |
Enabled | Enable Top Performance function. |
"Top Performance" will increase H/W working speed. Different system configuration (both H/W component and OS) will effect the result. For example, the same H/W configuration might not run properly with Windows XP, but works smoothly with Windows NT. Therefore, if your system is not perform enough, the reliability or stability problem will appear sometimes, and we will recommend you disabling the option to avoid the problem as mentioned above.
English
- 43 - | BIOS Setup |
