Gigabyte GA-M68MT-S2P Load Fail-Safe Defaults, System/CPU Warning Temperature, CPU Smart FAN Mode

System/CPU Warning Temperature

Sets the warning threshold for system/CPU temperature. When system/CPU temperature exceeds the threshold, BIOS will emit warning sound. Options are: Disabled (default), 60oC/140oF, 70oC/158oF, 80oC/176oF, 90oC/194oF.

CPU/SYSTEM FAN Fail Warning

Allows the system to emit warning sound if the CPU/system fan is not connected or fails. Check the fan condition or fan connection when this occurs. (Default: Disabled)

CPU Smart FAN Control

Enables or disables the CPU fan speed control function. Enabled allows the CPU fan to run at different speed according to the CPU temperature. You can adjust the fan speed with EasyTune based on system requirements. If disabled, the CPU fan runs at full speed. (Default: Enabled)

CPU Smart FAN Mode

Specifies how to control CPU fan speed. This item is configurable only when CPU Smart FAN Control is set to Enabled.

Auto	Lets the BIOS automatically detect the type of CPU fan installed and sets the optimal
	CPU fan control mode. (Default)
Voltage	Sets Voltage mode for a 3-pin CPU fan.
PWM	Sets PWM mode for a 4-pin CPU fan.

2-10 Load Fail-Safe Defaults

CMOS Setup Utility-Copyright (C) 1984-2010 Award Software

	MB Intelligent Tweaker(M.I.T.)	Load Fail-Safe Defaults
	Standard CMOS Features	Load Optimized Defaults
	Advanced BIOS Features	Set Supervisor Password
	Integrated Peripherals	Set User Password
	Power Management Setup	Save & Exit Setup
	PnP/PCI Configurations	Load Fail-Safe Defaults (Y/N)? N
		Exit Without Saving
	PC Health Status
ESC: Quit		: Select Item
F8: Q-Flash		F10: Save & Exit Setup

Load Fail-Safe Defaults

Press <Enter> on this item and then press the <Y> key to load the safest BIOS default settings.

In case system instability occurs, you may try to load Fail-Safe defaults, which are the safest and most stable BIOS settings for the motherboard.

BIOS Setup - 32 -