Gigabyte GO-RAMDISK-BOX-RH Install i-RAM BOX into the system, Complete, 5V SB connector

English

8- 6: Install i-RAM BOX into the system

Put i-RAM box into the 5.25 inch cd-rom drive.

8- 7: Connect the power connector of the rear panel

8-7-1 Connect the cable of the 5V SB

Connect the cable of the 5V SB to the 5V SB connector of the rear panel . Connect another 24 pin power connector to the motherboard (Figure f).

8-7-2 Connect the 4 pin power connector to the rear panel.

8- 8: Connect the SATA cable to the rear panel

Connect one end of the SATA connector of the rear panel (Figure g) then connect the other end to the motherboard SATA port.

8- 9 : Complete

Figure e Figure f

5V SB connector

Figure g	Figure h
SATA connector

- 8 -