Introduction
The cooling fan
The cooling fan helps to keep the exterior cool during normal use. When a burner is operated, you should hear the cooling fan switch on automatically and be able to feel air evacuating from the appliance vents just below the fascia. The cooling fan will continue to operate for approxima tely 10 minutes after turning off the burners. This is normal.
If there is no such indication that the fan is operating, the appliance will require servicing. DO NOT USE THE APPLIANCE UNTIL IT HAS BEEN SERVICED. Switch the appliance off at the mains and contact Customer Care.
For your safety
This appliance has a built in safety device to isolate the gas and electric supplies to various components in the event of fan failure.
If the programmer/clock and lights do not function, and the ignition system stops working, the safety device has operated. Within an hour, the safety devicewillreset itselfandthe programmer /clock display will flash.
To reset the programmer/clock, press the Plus and Minus buttons together for a few seconds. The ‘●’ between the hours and minutes on the LED will flash. Use the Plus and Minus buttons to reset the time.
If when a burner control is turned on, the fan does not operate in the normal way, then the appliance will require
servicing. DO NOT USE THE APPLIANCE UNTIL IT HAS BEEN SERVICED. Switch the appliance off at the mains and contact Customer Care.
Continued use of the appliance without it being serviced could result in excessive temperatures being generated, which in turn could reduce the life of certain components.
Ventilation
The use of a gas cooking appliance results in the production of heat and moisture in the room in which it is installed. Ensure that the kitchen is well ventilated; keep natural ventilation holes open or install a mechanical ventilation device (mechanical ventilator).
Prolonged intensive use of the appliance may call for additional ventilation, for example opening a window, or more effective ventilation, for example increasing the level of mechanical ventilation where present.
This appliance is not connected to a combustion produc ts evacuation device. It must be installed and connected in accordance with current installation regulations. Particular attention must be given to the relevant regulations regarding ventilation.
3
