CLEANING
Glass parts
FACIA PANEL & DOOR PANELS
Use a mild cream cleaner - eg; “Cif”. Rinse thoroughly and dry with a soft cloth. Do not use abrasive cleaners or polishes.
To remove the glass panel for cleaning, open the door to the door stop position (about 30˚ open), hold the top and bottom edges of the panel and slide out. Note that if the door is opened fully when removing the inner door glass panel, the door may spring shut.
Important: if the inner door glass panel is removed for cleaning, it must be replaced the right way up as shown, and pushed fully in to the stop position.
Painted, plastic and metal finish parts
DOOR FRAME & HANDLE, CONTROL KNOB
Only use a clean cloth wrung out in hot soapy water.
Stainless Steel surfaces (stainless steel finish models only)
FACIA PANEL, HANDLES, DOOR PANELS
Only use a clean cloth wrung out in hot soapy water, and dry with a soft cloth.
Stubborn marks can be removed using “Luneta”. We recommend that you clean the whole of the stainless steel area to maintain a uniform finish. Supplies can be purchased from the Customer Care Centre.
Do not use undiluted bleach or any products containing chlorides as they can permanently damage the steel.
Extracare should be taken when cooking food in salted water. Some foods are corrosive - eg; vinegar, fruit juices and especially salt - they can mark or damage stainless steel if they are left on the surface. Turn off and wipe any spillage immediately, taking care to avoid skin contact with any hot surface or spillage.
Sharp objects can mark the surface of stainless steel, but marks will become less noticeable with time.
To maintain the finish of the stainless steel, or to remove any greasy marks, wipe the stainless steel surface sparingly with a minimum amount of “Johnson’s Baby Oil” and kitchen paper.
Do not use cooking oils, as these may contain salt, which can damage the stainless steel surface.
20
