INTRODUCTION
To replace an oven light bulb
WARNING - switch off the electricity supply to the appliance at the socket, to avoid the risk of electric shock.
Wait until the oven is cool, then remove the oven shelves.
The oven light is at the rear of the oven cavity.
Unscrew the lens cover (turn anticlock- wise). Unscrew the bulb and replace. Replace lens cover.
Please note that the oven light bulb is not covered by guarantee.
Environmental Protection
We are committed to protecting the environment and operate an Environmental Management System which complies with BS EN ISO 14001:1996.
Disposal of packaging
•All our packaging materials are recyclable and environmentally friendly.
•Please help us to protect our environment by disposing of all packaging in an environmentally friendly manner.
•Please contact your local authority for the nearest recycling centre.
Caution: Packaging materials can pose a risk of suffocation - keep away from children.
The appliance is designed to fit into
a standard 600mm wide housing unit with a minimum internal height of 880mm.
Cooling fan
The cooling fan helps to keep the exterior cool during normal use. When an element is operated, you should heat the cooling fan switch on automatically and be able to feel air evacuating from the appliance vents just below the fascia.
The cooling fan will continue to operate for approximately 10 minutes after turning off the elements. This is normal.
If there is no such indication that the fan is operating, the appliance will require servicing. DO NOT USE THE APPLIANCE UNTIL IT HAS BEEN SERVICED. Switch the appliance off at the mains and contact Customer Support.
Glass panels
To meet the relevant Standards of Domestic cooking appliances, all the glass panels on this appliance are toughened to meet the fragmentation requirements of BS3193. This ensures that, in the unlikely event that a panel breaks, it does so into small fragments to minimise the risk of injury.
Please take care when handling, using or cleaning all glass panels as any damage to the surfaces or edges may result in the glass breaking without warning or apparent cause at a later date. Should any glass panel be damaged, we strongly recommend
3
