Installation Instructions
Connect to the electricity supply
Warning: This appliance must be earthed.
The flexible mains lead is supplied connected to a BS 1363 fused plug, having a fuse of 13 amp capacity.
If this plug does not fit the socket in your home, it should be replaced with a suitable plug as outlined below.
E(Earth)
GREEN / YELLOW
N (Neutral) | L (Live) |
BLUE | BROWN |
USE A 13 AMP FUSE IN A 13 AMP PLUG
The wires in the mains lead are coloured in accordance with the following code:
Green and yellow = Earth, Blue = Neutral,
Brown = Live.
As the colours of the wires in the mains lead for the appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
1.The wire which is coloured green and yellow must be connected to the terminal marked E 
(Earth) or coloured Green.
2.The wire which is coloured blue must be connected to the terminal marked N (Neutral), or coloured Black.
3.The wire which is coloured brown must be connected to the terminal marked L (Live), or coloured Red.
The plug and socket must be accessible after installation.
Should the mains lead of the appliance ever require replacing, we recommend that this is carried out by a qualified electrician who will replace it with a lead of the same size and temperature rating.
Important: - ensure that you route all mains and electrical cables and flexible tubing well clear of any adjacent heat source. Under no cir- cumstances should the electric mains lead be allowed to come into contact with the vertical oven flue tubes on the rear of the appliance.
25
