Installation Instructions
Stability bracket
If the cooker is fitted with a flexible connection, a stability bracket should be fitted to engage in the back of the cooker. A stability bracket can be bought from your local supplier.
A stability bracket can be fitted as follows:
1.Place the cooker in position and draw a PENCIL LINE level with the front edge.
2.Mark the centre of the cooker to give the CENTRE LINE for the bracket.
3.Remove the cooker and mark off 450mm from the PENCIL LINE to locate the front edge of the lower bracket.
4. Fix the bracket to the floor. Measure from FLOOR LEVEL to
ENGAGEMENT EDGE in the back of
the cooker and add 3mm.
5.Assemble the underside of the top part of the bracket to this height.
Levelling
Place a spirit level on a baking sheet onto an oven shelf.
The cooker is fitted with levelling feet at the front and rear.
24
