Operation
Making a straight cut |
|
| Making a mitre cut | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1.Adjust the rip fence (15) to the desired width from the blade using the scale (12) on top of the table for reference.
2.Secure the rip fence to the table by lowering the rip fence locking lever (16).
3.Firmly position the tile against the rip fence and pass through the blade in a smooth action.
Note. Do not force the tile into the blade too quickly or with excessive force, allow the blade to do the work.
1.Fit the mitre gauge assembly (17) over the rip fence.
2.Choose the desired mitre angle and tighten the mitre gauge locking knob (18).
3.Place the tile into the mitre gauge and hold it firmly in position.
4.Push the mitre gauge together with the tile towards and into the blade.
12
