Global Machinery Company 25CC Problems, Power loss or sudden stopping of the engine

Models: 25CC

1 16

Page 13

•Check whether the fuel tank is empty.

•The mixture does not reach the carburettor. Clean the fuel filter in the fuel tank.

•There is water in the mixture. Drain and rinse all the fuel system.

•The air filter is dirty. Clean the air filter.

•There are carbon deposits in the cylinder exhaust pipe or the muffler. Clean those or change the muffler.

•Overloaded cutting due to too high grass or too thick for engine power.

•Wrapped vegetal material on the cutting tool.

Image 13

Contents

PETROL BRUSH CUTTER 25CCBlack Magenta Cyan Yellow Contents Warranty PowertoolsIntroduction Description of symbolsEnvironmental protection Choke controlGeneral safety instructions Specifications2 Personal safety 3 Power tool use and caref Keep cutting tools sharp and clean Contents of carton4 Service Additional safety rules for petrol brush cuttersKnow your product head and safety guard AssemblyJoining the upper and lower shaftsMOTOR FUEL MIX AT 401 ONLY FuellingRunning in the engine Stopping the brush cutterUse of the brush cutter Starting the brush cutterUse with the line trimming head Use with the brush cutting blade1. Stop the engine T Q V W MaintenanceAir filter Fuel FilterChecking the spark plug Storage and maintenance after useServicing Power loss or sudden stopping of the engine ProblemsBad quality cut Page Page 1300 880 001 Australia or 0800 445 721 New Zealand GMC customer assist