Global Machinery Company DB305SMS Slide lock, Mitre table lock, Bevel lock, Bevel adjuster

Slide lock	E
When tightened, the slide
lock (29) prevents the
saw head from sliding.
Tighten the slide lock during
transportation (fig. E).

Mitre table lock
	F
The mitre table lock (25) is
used to lock the table at the
desired mitre angle (fig. F).

The mitre saw cuts from 0° to 45° both left and right. To adjust the mitre angle loosen the mitre table lock and using the mitre table handle

adjust the mitre angle to the desired position. The mitre table features positive click stops at 0°, 15°, 22.5°, 30° and 45° for quick setting of common mitre angles.

WARNING. Be sure to tighten the mitre table lock before making a cut. Failure to do so could result in the table moving during the cut and cause serious personal injury.

Bevel lock	G
The bevel lock (16) is used
to set the blade at the
desired bevel angle (fig. G).
The mitre saw bevel cuts
from 0° to 45° to the left
and right. To adjust the bevel
angle loosen the bevel lock
and pull out the 0° bevel
adjuster (18). Adjust the saw
arm to the desired bevel angle.

WARNING. Be sure to tighten the bevel lock before making a cut. Failure to do so could result in the saw arm moving during the cut and cause serious personal injury.0°

Bevel adjuster
	H
The bevel adjuster (18)
needs to be pulled out before
the bevel angle can be
adjusted (fig. H).
To return the saw arm to
the vertical (0° bevel)
position move the saw arm
to the left and push in the
0° bevel adjuster.

Return the saw blade to the vertical position, it will automatically stop at the 0° bevel position. Tighten the bevel lock.

Clamp assembly
	I
The clamp assembly (10)
can be mounted to the fence,
either side of the saw blade,
to suit the task at hand
(fig. I).

Use the clamp assembly lock

(11)at the back of the fence to secure the clamp assembly in position (fig. J).

J

11