Accessories

The GMC DB250SMS / DB305SMS Double Bevel Slide Compound Mitre Saw is supplied with the following accessories as standard:

•Saw blade (fitted)

•Workpiece clamp

•6mm Hex key

•Side bars x2

•Stabiliser Bar

•Dust bag

•Instruction manual

•Receipt holder

Page 8

Image 8

Global Machinery Company DB250SMS, DB305SMS instruction manual Accessories

Contents

Double Bevel Slide Compound Mitre Saw Contents Description of symbols SpecificationsDear Customer Introduction Damage to hearing if effective earmuffs are not worn Safety rules for laser lightsGeneral safety instructions Page Additional safety rules for mitre saws Wear gloves when handling saw blades and rough materials Take additional care when trenching slottingEnsure that the arm is properly secure when bevelling Select saw blades in relation to the material being cut Accessories Know your product Unpacking TransportationBench mounting Stabiliser bar Bevel adjuster Clamp assemblySlide lock Mitre table lock Dust bag Spindle lock buttonRotating lower Blade guard Setting the table Switch 24 fig. STurning on and off Turning on Redeye laser line Generator Setting the fence Square with the table To the base fig. dTighten the screws securing the fence Retighten the bevel lock Raise the saw arm 5 to its highest position Changing a bladeRetighten the screw securing the mitre scale pointer Outer blade Washer where they Contact the blade Up and pressDirection as the blade Screw has a left hand Thread fig. l That the inner blade Cross-cutting without slide action Across the grainMade with the mitre table Set at 0º fig. q. Mitre By loosening the clamp Cross-cutting With slide action Bevel cutBevel cut is made by Angled to the fence Adjusting the laser lines Compound mitre cut Towards the eye of a person for longer than 0.25s Using the laser line generatorDo not stare directly at the y laser beam General inspection Maintenance Power cord maintenanceCleaning Page Page Save this Manual for future reference