Mitre table lock | E |
The mitre table lock (25) is used to lock the table at the desired mitre angle (Fig. E).
The mitre saw cuts from 0° to 52° both left and right. To adjust the mitre angle loosen the mitre table lock and using the mitre table handle adjust the mitre
angle to the desired position. The mitre table features positive click stops at 0°, 15°, 22.5°, 30°, 45° and 50° for quick setting of common mitre angles.
WARNING. Be sure to tighten the mitre table lock before making a cut. Failure to do so could result in the table moving during the cut and cause serious personal injury.
Bevel lock |
| |
F | ||
The bevel lock (16) is used to | ||
| ||
set the blade at the desired bevel |
| |
angle (Fig. F). The mitre saw |
| |
bevel cuts from 0° to 45° to the |
| |
left. To adjust the bevel angle |
| |
loosen the bevel lock and adjust |
| |
the saw arm to the desired |
| |
bevel angle. |
|
WARNING. Be sure to tighten the bevel lock before making a cut. Failure to do so could result in the saw arm moving during the cut and cause serious personal injury.
Clamp assembly |
| |
G | ||
The clamp assembly (10) | ||
| ||
can be mounted to the fence, |
| |
either side of the saw blade, to |
| |
suit the task at hand (Fig. G). |
| |
When performing a bevel cut |
| |
the workpiece clamp should be |
| |
positioned on the right hand side |
| |
of the fence. |
|
Use the clamp assembly lock
(11)at the back of the fence to secure the clamp assembly in position (Fig. H).
Spindle lock button
The spindle lock button (26) prevents the blade in the saw from rotating (Fig. I). Depress and hold the spindle lock button
while installing, changing, or removing the blade.
Ia
LSMS210A | LSMS250A |
Rotating lower blade guard
The rotating lower blade guard
(12)provides protection from both sides of the blade (Fig. J). It retracts over the upper blade guard (9) as the saw is lowered into the workpiece.
Dust bag
The dust bag (15) fits over the dust extraction port (27) (Fig. K). For more efficient operation, empty the dust bag when it is no more than half full. This allows better air flow through the bag.
H
Ib
J
K
11
