Power tool use and care
•Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
•Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
•Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
•Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
•Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
•Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
•Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation.
Service
•Have your power tool serviced by a qualified repair personnel using only identical replacement parts. This will ensure that the safety of the power tool
is maintained. | 5 |
|
Additional safety rules for line trimmers
•Always wear adequate protective clothing when operating the machine to avoid injuries to face, eyes, hands, feet, head or hearing. Use safety glasses or a face shield, high boots or sturdy shoes, long trousers, work gloves, a hard hat and hearing protection.
•When starting up and when the machine is in operation, keep the cutting section away from all parts of the body, especially the hands and feet.
•Do not start the machine when it is upside down or when it is not in the operating position.
•Switch the motor off and pull out the plug when the machine is not being used, left unattended, being cleaned, being moved from one place to another or when the spool is being changed or the length of line manually adjusted.
•If there is an interruption to the power supply or the extension cable is damaged, switch off the machine immediately and remove the plug from the power point.
•Do not move the machine by pulling on the electrical cable. Always use the handgrip.
•Do not operate the machine near people, especially children or pets. Turn it off if they get too close. Maintain a safe distance of at least 5m from other people when using the machine.
•Keep a balanced and stable stance while using the machine.
•Ensure that the area being cut is free from strings, stones and debris.
•Do not cut against hard objects. This could cause injury to the operator and damage to the machine.
•Never use the machine without the guard. Never use the machine if the guard is damaged.
