Warning. The guard is vital for your and other people’s safety and for the machine’s operating efficiency.
•Do not try to stop the cutting device (nylon line) with your hands. Always let it come to a stop by itself.
Warning. After switching off the machine, the cutting device continues to rotate for a few more seconds.
•Only use the original type of nylon line. Under no circumstances use metal line instead of nylon.
•Do not use the machine to cut grass which is not on the ground. For example, do not cut grass which is on walls or rocks.
•Do not switch on the machine in enclosed or poorly ventilated spaces or in the presence of inflammable and/or explosive substances such as liquids, gasses and powders.
•Only cut during broad daylight or with adequate artificial light.
•Check that all grass cuttings and dirt have been removed from the ventilation vents.
•Do not cross roads or gravel paths with the machine still running.
•When the machine is not in use, store it in a dry place and out of reach of children.
•After use, disconnect the machine from the power supply and check for damage. If you have the slightest doubts, contact an authorised service centre.
•Only use the machine according to the instructions given in this manual.
•Check regularly that the screws are tight.
•Do not try to repair the machine or access internal parts. Contact authorised service centres only.
•Do not get distracted and always concentrate on what you are doing. Use common sense. Never operate the machine when you are tired, sick or under the influence of alcohol or other drugs.
Wear goggles
Wear ear defenders
Wear a breathing mask
Unpacking
Due to modern mass production techniques, it is unlikely that your power tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury.
Contents of carton
•Blade guard
•Edging wheel
•Secondary handle
•4 Screws and washers
6
