outwards. Rotate the knob in a clockwise direction until all of the slack is taken out of assembly.

4.Check to ensure the front wheel arm has located into one of the pre allocated positions and the head of the bolt securing the front wheel arm is sitting flat on the surface of the wheel arm. Firmly tighten the height adjustment knob.

Edge guide

The edge guide is used when edging is required against a solid material like a paved surface. It is important to ensure the edge guide is used in these conditions as the edge guide will assist in preventing the blade from making direct contact with the paved surface.

To use the edge guide, hold the edge guide control knob (6) and move the knob sideways toward the centre of the edger and then push downwards, ensuring that the guide fits into the allocated slot.

The edge guide control knob should be returned to the upright position to lock the guide in the down position.

To release the edge guide, hold the edge guide control knob and move the knob sideways toward the centre of the edger and then pull upwards to lift the guide.

Edging

1.Before edging check the area and remove all obstacles and objects that could be thrown.

2.Set the cut depth at 20mm and set edge guide to the down position. Blade depth may have to be adjusted to differences in height between hard surfaces and the top of the grass.

3. The guard is fitted with a

 

3

raised rib section which acts

as a blade cut indicator (11).

 

This rib will assist in guiding

 

the operator where the blade

 

will cut. During operation the

 

operator can sight down the

 

rib of the guard to where the

 

edge is to be cut.

 

 

4.Before starting the edger, line up the tool so the edge guide rests against the edge of the paved surface, both rear wheels should be on the paved surface when edging.

Hint: When there is heavy overgrowth of grass over the paved surface it may drag on the guard. An initial cut may be required with the edger on the grass side. This will require lifting up the edger guide and may require reducing the depth of cut.

5.To avoid kickback of edger,

tilt the handle down so the5

blade is above the ground.

6.When starting to edge, run the engine at full throttle and lower the blade gently into the ground, being careful not to hit concrete with the blade.

7.Slowly lift the handle to lower the blade, finding the edge of the paved surface and start edging. Then move tool forward slowly along edge of paved surface, keeping the edge guide pressed lightly against the pavement edge.

For the first edging each season, it’s best to move forward slowly because grass is thickest then. Subsequent edging will be completed more rapidly. If the tool slows down, back it up slightly until the blade returns to normal speed. During edging some sparks may be generated from hitting stones, this is normal.

10

Page 9 Page 11
Page 10
Image 10
Global Machinery Company PEDG instruction manual Edge guide, Edging, Guard is fitted with a
Page 9 Page 11

PEDG specifications

Global Machinery Company PEDG has established itself as a notable player in the machinery and equipment industry, catering to a diverse range of sectors, including construction, agriculture, and manufacturing. Founded with the vision of delivering innovative machinery solutions, PEDG has consistently pushed the boundaries of technology and engineering excellence.

One of the main features of PEDG is its commitment to quality and durability. Their machinery is designed to withstand the rigors of demanding environments, which is essential for industries that operate on tight schedules and require reliable equipment. This durability is achieved through the use of high-grade materials and advanced manufacturing processes that ensure each machine can meet the challenges of everyday use.

In terms of technology, PEDG incorporates cutting-edge innovations across its product range. For instance, many of their machines are equipped with state-of-the-art automation and control systems, enabling operators to achieve optimal performance while minimizing the risk of human error. This focus on automation helps to enhance productivity, reduce operational costs, and improve safety within the workplace.

Another noteworthy characteristic of PEDG is its commitment to sustainability. The company has actively sought to develop energy-efficient machinery that reduces emissions and minimizes environmental impact. By utilizing renewable energy sources and designing machines that consume less energy, PEDG aligns itself with global sustainability goals, appealing to environmentally conscious customers.

Furthermore, PEDG emphasizes the importance of customer support and maintenance services. Several products come with extended warranties, and the company offers training programs for operators to ensure they can maximize the potential of their equipment. This comprehensive support system not only fosters customer loyalty but also ensures that the machines operate at peak efficiency throughout their lifecycle.

Overall, Global Machinery Company PEDG continues to be a leader in the machinery sector by focusing on innovation, quality, and sustainability. With a diverse product offering and a strong commitment to customer satisfaction, PEDG is well-positioned to meet the evolving needs of its clients in a competitive marketplace. Through its advanced technologies and robust manufacturing processes, PEDG exemplifies the intersection of performance and responsibility in the machinery industry.
Top Page Image Contents