Specifications
Engine: | 26cc, 2 Stroke |
Speed: | 0 - |
Depth of cut: | 10mm, 20mm, 30mm |
Size of blade: | 180mm |
Bore size: | 18mm |
fuel type: | Unleaded |
Fuel mixture: | Unleaded petrol / oil (40:1) |
Fuel tank capacity: | 700ml |
Equivalent Spark plugs: | NGK BM4A |
| CHAMPION CJ14 |
| DENSO |
| BOSCH WS8E |
Sound pressure value: | 119db(A) |
Weight: | 7.5kg |
Safety instructions
WARNING. Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings below refers to your
Save these instructions
Work area
•Keep work area clean and well lit. Cluttered and dark areas invite accidents.
•Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
•Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
Personal safety
•Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result
in serious personal injury.
•Use safety equipment. Always wear eye protection. Safety equipment such as a dust mask,
•Remove any adjusting key or wrench before turning the tool on. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury.
•Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
•Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
•If devices are provided for the connection of dust extraction and collection facilities ensure that these are connected and properly used. Use of these devices can reduce
Power tool use and care
•Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
•Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
4
