•Ensure the tool is switched off completely before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
•Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
•Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
•Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
•Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation.
Service
•Have your power tool serviced by a qualified repair personnel using only identical replacement parts. This will ensure that the safety of the power tool
is maintained.
Additional safety rules for edgers
Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following hazards may arise in connection with the tool’s construction and design:
•Contact with the blade.
•Kickback of the edger due to hidden solid objects.
•Blade fracture.
•Catapulting of blade pieces.
•Damage to hearing if effective earmuffs are not worn.
•Do not use blades that are deformed or cracked.
•Do not operate in a hazardous location. Such areas include where there is a risk of explosion of petrol fumes, leaking gas or explosive dust.
•Do not operate in a confined area. Exhaust gases, smoke or fumes could reach dangerous concentrations.
•Protect your tool. This edger is NOT WEATHERPROOF and should not be exposed to direct sunlight, high ambient temperature and damp, wet or high humidity conditions.
•Do not smoke while refuelling. This is potentially dangerous as it may ignite the fuel and cause an explosion.
•Take care not to spill fuel. When refuelling the edger ensure that the motor has been switched off. Prevent the spilling of fuel as this may also ignite with the hot motor. Never refuel whilst the engine running.
•Be careful where you store the edger. Store the edger in a dry area away from flammable liquids.
•Keep your distance. The edger emits exhaust fumes. Ensure bystanders keep a safe distance.
•Ensure you use
•Never fill fuel tank indoors. Never fill fuel tank when engine is running or hot. Do not smoke when filling fuel tank.
•When making any adjustments to the tool always wait for the blade to come to a complete stop and turn off the tool.
•Never attempt to unclog the blade chamber by tapping the tool on the ground, this can damage the unit.
5
