GN Netcom 9000MWD manual Using The Hold Feature on Handset, Using The Mute Feature

Using The Hold Feature (on Handset)

The “Hold” key is used to place a caller on hold. To use, simply press the “Hold” key on the handset. The LED light on the handset will indicate that the line is on hold and the base unit LED will blink rapidly Green.

When placing a caller on hold, the line will not be disconnected. To return to the caller, press the “ON/OFF” key on the handset or the “SPEAKER” key on the base.

Note: Pressing the SPEAKER key on the base when the handset is on hold will activate the base unit. The hand- set will stay on hold until released.

Using The Mute Feature

A “Mute” key is provided to allow for privacy during a background conversation. When the “Mute” key is activated, the microphone in the speakerphone within the base becomes disabled. When the “Mute” feature is activated, the caller will not hear your voice. The “Mute” key will illuminate to show that the feature is acti- vated.

To de-activate, press the “Mute” key again.

The MUTE feature only works on the base unit. The handset does not mute out when MUTE is active.

31