![](/images/new-backgrounds/1210722/21072215x1.webp)
Headset | A | B |
|
|
To switch from using the headset to mobile phone during a call:
1. Terminate the link between the headset and the mobile phone by closing the headset boom arm [A]
Note: do not press the Multifunction Button.
2.The mobile phone will prompt you to continue the call [B].
3.You have 30 seconds to accept the transfer to your mobile phone; after accepting continue the call on your mobile phone.
4.To end the call, use the mobile phone’s End Call button/functionality.
To switch from using the mobile phone to the headset during a call:
1.With the boom arm open, simultaneously press the Volume up/down on the headset.
2.An audible tone will shortly be heard, and the connection will be established momentarily.
3.Continue the call on your headset.
4.To end the call, press the Multifunction Button on the headset.
5.You may continue wearing your headset, or close the headset boom arm and place in the base for charging.
Consult your mobile phone’s user guide for full details.
4.0Additional functionality and features
4.1Volume settings and functionality
Volume adjust [A]
There are two volume buttons, one on each side of the headset’s Multifunction Button. The GN 6110’s headset comes equipped with intelligent volume
– (down).
Press the volume + (up) or volume – (down) button until the desired volume level has been reached. If minimum/maximum volume is reached, an audible tone will be heard in the headset.
Volume match
+
For your own comfort, match the volume level of your desk telephone to that of your mobile phone. This will ensure that you get a consistent volume level for all of your calls, no matter which device you use. After the initial volume match, subsequent volume level changes made on your headset will be replicated on your desk and mobile phones.
9