MULTITASKER
400-0394-007 20
6: HUE (0)
1: +
2: -
7: ASPECT RATIO (4:3)
1: 16:9
8: 3D COMB FILTER (ON)
1: OFF
9: NOISE REDUCTION (ON)
1: OFF
A: FREEZE (OFF)
1: ON
3: VERSION
This selection displays the model number
and firmware revision, and then redisplays
the Main Menu.
4: STATUS
This selection displays the card status and
then redisplays the Main Menu.
5: HELP
This selection displays a list of commands
available for the MT106-103 along with a
brief description.
ESC
This selection returns you to the parent
menu with the listing of all cards.
7.4.5 MENU MODE EXAMPLES
All Menu Mode examples assume an
MT106-103 is installed in slot 4 of unit ID 1.
NOTE: The communication software you use
may echo each character as it is typed
when entering numeric values (not
selecting menu items). For example,
entering a value of 03 may appear as
0033 on the screen.
1. Change Output Resolution
An MT106-103 is in slot 4. Change the output
resolution to 1280x1024. Start by clicking the
mouse in the Terminal Window. Follow the
keystrokes below:
Enter List of systems
1Select unit ID 1
04 Select MT106-103 in slot 4
2Select Setup Menu
1Select OUT RESOLUTION
5Select 1280x1024
ESC Return to Setup Menu
ESC Return to the Main Menu
2. Adjust Brightness
Increase the brightness on the output of the
MT106-103 in slot 4. Starting from the
MT106-103's Main Menu, follow the keystrokes
below:
2Select SETUP
2Select BRIGHTNESS
1Increment by one
Repeat until the desired brightness is
achieved.
ESC Return to SETUP
ESC Return to the Main Menu
3. Display Card Status
Display the status of the MT106-103 in slot 4
starting from its Main Menu.
4Display card status
NOTE: The Main Menu will be redisplayed
after the status is displayed.