GN Netcom GN 9330, GN9350 manual LCD display, Navigation and markers, Default/start position

GN 9350 GN 9330 GN 9330 USB

2.4Connecting to external Online Indicator (OLI) (GN Netcom accessory)

An external online indicator (accessory) can be placed on your desk or near your telephone to indicate when you’re on a call.

To connect to an external OLI: Plug cord from OLI to base’s OLI port.

GN 9350 GN 9330 GN 9330 USB

2.5LCD display

Your base unit has a LCD display and display control with which you control 5 settings:

Transmit volume setting

Hookswitch selection

Range/power selection

Sound mode selection

Protection level selection (IntelliTone®)

Navigation and markers

Navigate through the LCD display’s 5 menus horizontally using the display control’s34ar- rows. Within each of the 5 menus, navigate vertically with the display control’s56arrows.

Press the OK button to confirm a specific choice/value within the 5 different menus. A star (*) beside a selected choice/value indicates the current setting.

Default/start position

The LCD display is always on and ready to use. The permanent default/start position for the LCD display is the leftmost transmit volume setting . The LCD display will always revert to this default/start position, if not operated for 30 seconds.

Within each of the 5 menus, there is also a factory-set default. This default remains until you change it. The last selected choice/value (within each of the 5 menus) is always displayed in the first line of its menu.

Changing the settings

2.5.1 Transmit volume

The transmit volume must be adjusted properly so your voice is heard clearly.

If you haven’t already adjusted the transmit volume during your initial setting up, do so now by completing the following:

1.Put on headset.

2.Use 34to locate transmit volume menu on base display.

5