• Minimum high-level output: 4.26V (Source -24mA)
• Maximum low-level output: 0.44V (Sinks @ 23 mA)
• Maximum low-level input: 0.8V (Sinks 1.2 mA)
• Minimum high-level input: 2V

OEM650/OEM650X • INSTALLATION

CW (Signal 3) & CCW (Signal 4) Limit Inputs

The OEM650X has two dedicated

hardware end-of-travel limits

 

 

 

+5V

 

 

 

 

 

(CCW and CW ). When you

 

 

 

• Maximum low-level input: 0.8V

 

 

 

 

(Sinks 1.2 mA)

 

 

 

 

 

power up the OEM650X, these

 

 

4.75k

 

 

 

• Minimum high-level input: 2V

inputs are enabled (high). To test

 

 

 

 

 

 

 

 

the OEM650X without connect-

 

 

 

 

 

 

 

HCT244

ing the CCW and CW limits, you

 

 

 

 

 

 

 

 

must disable the limits with the LD3 command. You can use the Limit Switch Status Report (RA) and Input Status (IS) commands to monitor the limits’ status. The figure represents a typical configura- tion of these inputs.

Home Position Input (Signal 5)

The OEM650X has one dedicated home input. The Home Limit input allows you to establish a

+5V

home reference input. This input is not active during power-up. Refer to the Go Home command for more information on setting

4.75k

HCT541

up and using this function. The figure represents a typical configu- ration of this input. (Refer to the OS and GH commands.)

Reserved (Signal 6)

This signal cannot currently be used to perform any function in this release of the OEM650X. Additional functionality may be provided in future revisions.

Output #1 (Signal 10) and Output #2 (Signal 8)

The OEM650X has two dedicated programmable outputs. They

ACTØ4

may be used to signal peripheral

devices upon the start or comple- tion of a move. The default state

for Outputs #1 and #2 is logic low. The figure represents a

typical configuration of these outputs. (Refer to the O command.)

Dedicated Fault Output (Signal 9)

The OEM650X has one dedicated fault output. This output may be used to signal peripheral devices if a unit failure occurs. The Fault output's default state is logic high. The figure represents a

+5V

+4.75k

• Maximum low-level output: 0.8V (Sinks 1.2 mA)

• High-level output: 5V

BS170

27

Page 33 Page 35
Page 34
Image 34
Parker Products OEM650X, OEM350X CW Signal 3 & CCW Signal 4 Limit Inputs, Home Position Input Signal, Reserved Signal
Page 33 Page 35

OEM650X, OEM650, OEM350, OEM350X specifications

Parker Products provides an exceptional lineup of industrial-grade portable adhesive applicators, including the OEM350X, OEM350, OEM650, and OEM650X. These models are designed to meet the demands of various manufacturing processes, delivering reliable and precise adhesive application for diverse industries such as automotive, woodworking, and packaging.

The OEM350 series, including both OEM350 and OEM350X, is characterized by its lightweight yet durable construction, allowing for ease of handling and transport. This series is particularly known for its versatility in handling various adhesive types, including polyurethane, hot melt, and cyanoacrylate adhesives. The OEM350 features a robust performance with a maximum output of 350 lbs per hour, ensuring efficient production rates while maintaining high-quality bonding. The OEM350X variant enhances these features with advanced temperature control technology, enabling users to maintain optimal adhesive viscosity for different applications.

On the other hand, the OEM650 and OEM650X models are designed for heavier-duty applications. The OEM650 can deliver up to 650 lbs of adhesive per hour, making it suitable for high-volume manufacturing processes. Its larger tank capacity and efficient heating mechanism allow for extended operational periods between refills, which significantly boosts productivity. The OEM650X takes performance a notch higher with integrated smart technology, which provides real-time monitoring of adhesive quality and system health, helping to reduce downtime and maintain efficiency in production.

All models in this range are equipped with user-friendly interfaces for easy operation. The control panels allow operators to set precise temperature and pressure settings, which can be adjusted to fit particular production needs. Additionally, the equipment is built with safety features such as automatic shut-offs and alarm systems, ensuring safe operation in busy manufacturing environments.

Parker Products’ OEM series stands out not only for its performance but also for its commitment to innovation. With advancements like modular design for easy maintenance and scalability, these applicators are designed to grow with your business. The robust performance, versatile application, and advanced technologies of the OEM350X, OEM350, OEM650, and OEM650X make them invaluable tools in the modern manufacturing landscape, driving efficiency and quality in adhesive applications.
Top Page Image Contents