OEM650/OEM650X • TUNING & SPECIFICATIONS

Touch Method

After you have had some experience with tuning, you should be able to locate the motor’s resonance speed by placing your fingertips on the motor shaft and adjusting the motor’s velocity. Once the reso- nance speed is located, you can tune the motor for maximum smoothness in the same way.

Tuning the Drive to the Motor

To tune the OEM650X, follow the directions below:

1.Command the drive (via RS-232C or STEP & DIRECTION inputs) so that the motor is running at maximum roughness, as shown in Table 3-1 for the 1st speed motor resonance.

Motor Size

1st Speed Resonance

2nd Speed Resonance

OEM57-40-MO

1.8 rps

3.6 rps

OEM57-51-MO

1.8 rps

3.6 rps

OEM57-83-MO

1.8 rps

3.6 rps

OEM83-62-MO

1.4 rps

2.8 rps

OEM83-93-MO

1.4 rps

2.8 rps

OEM83-135-MO

1.4 rps

2.8 rps

Table 3-1. Motor Resonance for Unloaded Motors

2.Adjust Offsets A and B for best smoothness.

3.Double the motor speed (2nd speed resonance) until the motor runs rough again.

4.Adjust offsets A and B again for best smoothness.

5.Repeat above steps until no further improvement is noted.

Motor Waveforms

Step motor manufacturers make every effort to design step motors that work well with sinusoidal current waveforms. However, due to physical limitations, most motors operate best with a current wave- form other than a pure sine wave.

The purpose of adjusting motor current waveforms is to cause the step motor to move with equal step sizes as the current waveforms are sequenced through the motor. This waveform matching will also help the motor run more smoothly. This can be changed with jumpers 6-8 (refer to Table 2-11).

Motor waveforms are usually adjusted after the drive has been tuned to its motor. If you do not have precision measurement equipment, you may select the correct motor waveform with one of the three methods described previously in this chapter (Tachometer Method, Sounding Board Method, Stethoscope Method, and Touch Method). These empirical methods generally yield acceptable results.

35

Page 41 Page 43
Page 42
Image 42
Parker Products OEM650X, OEM350X manual Tuning the Drive to the Motor, Motor Waveforms, Touch Method
Page 41 Page 43

OEM650X, OEM650, OEM350, OEM350X specifications

Parker Products provides an exceptional lineup of industrial-grade portable adhesive applicators, including the OEM350X, OEM350, OEM650, and OEM650X. These models are designed to meet the demands of various manufacturing processes, delivering reliable and precise adhesive application for diverse industries such as automotive, woodworking, and packaging.

The OEM350 series, including both OEM350 and OEM350X, is characterized by its lightweight yet durable construction, allowing for ease of handling and transport. This series is particularly known for its versatility in handling various adhesive types, including polyurethane, hot melt, and cyanoacrylate adhesives. The OEM350 features a robust performance with a maximum output of 350 lbs per hour, ensuring efficient production rates while maintaining high-quality bonding. The OEM350X variant enhances these features with advanced temperature control technology, enabling users to maintain optimal adhesive viscosity for different applications.

On the other hand, the OEM650 and OEM650X models are designed for heavier-duty applications. The OEM650 can deliver up to 650 lbs of adhesive per hour, making it suitable for high-volume manufacturing processes. Its larger tank capacity and efficient heating mechanism allow for extended operational periods between refills, which significantly boosts productivity. The OEM650X takes performance a notch higher with integrated smart technology, which provides real-time monitoring of adhesive quality and system health, helping to reduce downtime and maintain efficiency in production.

All models in this range are equipped with user-friendly interfaces for easy operation. The control panels allow operators to set precise temperature and pressure settings, which can be adjusted to fit particular production needs. Additionally, the equipment is built with safety features such as automatic shut-offs and alarm systems, ensuring safe operation in busy manufacturing environments.

Parker Products’ OEM series stands out not only for its performance but also for its commitment to innovation. With advancements like modular design for easy maintenance and scalability, these applicators are designed to grow with your business. The robust performance, versatile application, and advanced technologies of the OEM350X, OEM350, OEM650, and OEM650X make them invaluable tools in the modern manufacturing landscape, driving efficiency and quality in adhesive applications.
Top Page Image Contents