Go-Video DV2130 manual Reset Factory Settings, Set Alt Video Out

Alt Video Out

The “Alt Video Out” option must be set in the on-screen menu system if you have connected your DVD+VCR to a TV using the S-VIDEO OUT or COMPONENT VIDEO OUT jacks.

•Use the S-Video or Component Video connection method for the DVD player ONLY. The TV tuner and VCR can still be viewed through the RF or line outputs.

1Open “Initial Setup” menu

Press the SETUP button while the DVD is in Stop mode.

2Select “DVD”

Use the / buttons to highlight “DVD”, then press ENTER to select.

3Select “Display”

Use the / buttons to highlight “Display”, then press ENTER to select.

4Set “Alt Video Out”

Use the / buttons to highlight “Alt Video Out”, then press the  button to select one of the following options:

•S-Video - Select if you are using the S-VIDEO OUT jack on the rear panel to connect to your TV.

•Component - Select if you are using the COMPONENT VIDEO OUT jacks on the rear panel to connect to a Progressive (480p) or Interlaced (480i) TV.

•See your TV owner’s manual to determine what type of TV you have.

-Interlace : Interlaced Scan mode will work.

-Progressive : Progressive Scan mode will work, and Video and S-Video will not work. You will be prompted to press ENTER to confirm Progressive Scan mode or RETURN to cancel.

Reset Factory Settings

If you do not have a Progressive Scan television, the picture will be distorted in Progressive Scan mode. To reset the unit to its normal factory settings:

1. Eject any disc from the DVD disc tray.

2. Power the unit off and back on.

3.Press and hold the FF and REW keys on the front panel for five seconds.

4.Power the unit off and back on to return to normal operation.

Language : English

Front Display : Auto

Display Setup

On

33