Go-Video DV2130 manual Basic Recording, Insert Tape, Select a Channel to Record, Start Recording

Basic Recording

You can record a TV show in progress by inserting a blank tape and pressing the REC button. You can even add time in 30-minute increments up to 9 hours and 30 minutes by pressing the REC button repeatedly; see page 57.

NOTE: Be sure your videotape has a Record Safety Tab. If the tab is missing, you can cover the opening with a small piece of tape. Warning: Do not cover this opening unless you are sure you want to record over the tape.

Before You Begin...

•Power on the DVD+VCR

•Power on the TV

•Set the TV to channel 3, 4 or Line .

1Insert Tape

Insert a blank VHS tape into the VCR deck.

•Make sure the tape is long enough to record the entire program. To change the Recording Speed, see page 57.

2Select a Channel to Record

Use the 0–9 buttons or the CHANNEL /
buttons to select the desired channel, or press the TV VIEW button to select Line 1 or 2 if recording from an external device connected to the front or rear Line inputs, respectively.

3Start Recording

Press the REC button on the remote control or front panel.

For options while recording is in progress, see “Special Recording Features” on the next page.

➢To record from the DVD player to the VCR use the COPY button. It is not permissible to copy Macrovision-encoded DVDs.

								P	SKI	P/
							TU
						E				F.A	D
						S
											V
					N						T
											V
					R						V
				T	U						I
			E								E
	R										W
											2
								ENTER
				E	T						E
		R									W
								ENTER
3					REC		SP/SLP		CLEAR		DISC MENU
	SUBTITLE						MODE		ANGLE		MARK
		LAST CH				REPEAT			TIMER		SEARCH/IDX
						1
					EJECT

W	STOP	FF	REC	COPY	DVD VCR	CH	SETUP	L
								VIDEO

3

55