Digital Output
If your A/V receiver is equipped with a Dolby Digital decoder, your DVD+VCR can output Dolby Digital 5.1 sound, but you MUST enable this feature in the menu system to prevent damage to your speakers.
NOTE: Select “Bitstream” ONLY if you have connected a Dolby
Language : English
Front Display | : Auto |
1Open “Initial Setup” menu
Press the SETUP button while the DVD is in Stop mode.
2 Select “DVD”
Use the / buttons to highlight “DVD”, then press ENTER to select.
3 Select “Audio”
Use the / buttons to highlight “Audio”, then press ENTER to select.
4Set “Digital Output”
Use the / buttons to highlight “Digital Output”, then press
the button to select one of the following options:
• PCM - To use your DVD+VCR with an A/V receiver NOT equipped with a Dolby Digital decoder.
• Bitstream – To use your DVD+VCR with an A/V receiver equipped with a Dolby Digital decoder.
PCM
Bitstream
PCM Down Sampling | : On |
|
|
|
|
27
