Companion Owner's Manual: GC240, GC340, GC440

V. OPERATION

DC Voltage Meter

This meter (see figure 5) shows the amount of voltage in your Companion’s batteries.

Green indicates a full charge on the batteries.

Yellow indicates caution and approximately a one-half charge of the batteries.

Red indicates that the batteries have less than one-half of a charge remaining. See section X. “Care and Maintenance” for instruction concerning charging the batteries.

NOTE: Your scooter will automatically turn itself off if the battery output falls to or below 17.5 VDC.

Finger Tip Tiller Adjustment Lever

The Tiller on your Companion scooter employs a pneumatic piston to provide you with infinite tiller angle settings for your driving comfort.

Use one hand to grasp a handgrip.

Pull on the release lever and position the tiller at a comfortable and safe operating angle.

Release the tiller adjustment lever. It will automatically lock the tiller at the selected angle.

CONTROL OPTIONS

Golden Technologies, Inc. has made provision for the individual needs and abilities of the operators of the Golden Companion.

Your authorized Golden Technologies, Inc. dealer can reverse the throttle control lever controls so that when you pull on the left side of the lever, your scooter will move in the forward direction, and when you pull on the right side of the lever your scooter will move in the reverse direction.

SEATING CONTROLS

Armrest Height Adjustment

1.Loosen “Armrest Height Adjustment Knob” until you can pull it outward. See figure 6. Note: The knob is retained in its housing with a spring.

2.While keeping the knob pulled, raise or lower the armrest to the desired position then re- lease the knob. After releasing the knob, you may have to raise or lower the armrest un- til it aligns with the nearest locking position.

3.Tighten the height adjustment knob.

Companion

16

Page 16
Image 16
Golden Technologies GC340, GC240, GC440 DC Voltage Meter, Finger Tip Tiller Adjustment Lever, Armrest Height Adjustment