Companion Owner's Manual: GC240, GC340, GC440
V. OPERATION
Armrest Width Adjustment
To adjust the armrest width:
1.Loosen the adjustment knobs at the rear of the seat. See figure 6.
2.Slide the armrests in or out to the desired width. See figure 7.
3.Tighten the adjustment knobs.
Seat Height Adjustment
To adjust the seat height:
1.Remove the seat by raising the lever and lifting the seat straight up.
2.Set the seat aside.
3.Remove the bolt, nut, and washer that hold the seat post in the seat pedestal. See figure 8.
4.Position the seat post at the desired height while aligning the holes in the seat post and the seat pedestal.
5.Reinstall and tighten the nut, bolt, and washer. The bolt must be installed from the back of the pedestal, with the nut and washer to the front of the scooter.
6.Raise the lever when placing the seat back on the seat post.
Seat Rotation Lever
The seat can be rotated through 360° and locked at any 45° position.
1.Pull up on the seat rotatation lever and rotate the seat to the desired position. See figure 4.
2.Release the handle to lock the seat at any 45° position.
Flip-up Armrests
Pull up on the end of either armrest to flip it up for easy transfer on and off your Golden Companion. See figure 9.
Armrest Angle
To increase the armrest angle, turn the armrest angle screw clockwise. See figure
6.To decrease the armrest angle, turn the armrest angle screw counterclockwise.
ARMREST ADJUSTMENT
KNOBS
ARMREST ANGLE
ADJUSTMENT
FIGURE 6. ARMREST ADJUSTMENTS
FIGURE 7. ARMREST WIDTH
FIGURE 8. SEAT HEIGHT
FIGURE 9. FLIP-UP ARMRESTS
Companion | 17 |
